Specification |
|
|---|---|
| Model | LAW-8 |
| Type | Line array system |
| Frequency Response | 45Hz-20KHz±3dB |
| Directivity index(DI) | 12(±2)1.2KHz-16KHz |
| Power handling | LF 2×600W(RMS)2×1200W(PEAK) |
| MF 600W(RMS)1200W(PEAK) | |
| HF 200W(RMS)400W(PEAK) | |
| Sensitivity | LF 104dB(1W1M) |
| MF 107dB(1W1M) | |
| HF 111dB(1W@1M) | |
| MaxS.P.L | LF 135dB(PEAK/1M) |
| MF 135dB(PEAK/1M) | |
| HF 134dB(PEAK/1M) | |
| LF section | 2×12" (310mm)neodymium woofer |
| 75mm(3in) coil | |
| Nominal impedance | 8 ohm |
| MF section | 4×6.5" (170mm)neodymium MF |
| 50mm(2in)coil | |
| Nominal impedance | 8 ohm |
| HF section | 2×3"neodymium compression driver |
| with 75mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 110°H×7.5°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-8 will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-) |
| Rigging system | Please refer to the W-8 user |
| manual before any operation | |
| Input connectors | 2×Neutrik NL8 |
| Recommend crossover | LF 45Hz-400Hz |
| MF 400Hz-1200Hz | |
| HF 1200Hz-20KHz | |
| Dimensions | 1100×405×595mm(W×H×D) |
| Package dimensions | 1170×475×665mm/0.37cbm |
| Enclosure | Birch Plywood |
| Net weight | 65kg |
| Gross weight | 69kg |
Specification |
|
|---|---|
| Model | LAW-8- |
| Type | Line array system |
| Frequency Response | 60Hz-18KHz(±3dB) |
| Directivity index(DI) | 12(±2)1.2KHz-16KHz |
| Power handling | LF 2x400W |
| MF 4x120W | |
| HF 2x80W | |
| Sensitivity | LF 101db 60Hz-500Hz |
| MF 104db 300Hz-1.8Khz | |
| HF 110db 1.6Khz-18Khz | |
| MaxS.P.L | LF 130dB continuous,136dB peak |
| MF 130dB continuous,136dB peak | |
| HF 132dB continuous,138dB peak | |
| LF section | 2×12" (310mm)neodymium woofer |
| 75mm(3in) coil | |
| Nominal impedance | 8 ohm |
| MF section | 4×6.5" (170mm)neodymium MF |
| 50mm(2in)coil | |
| Nominal impedance | 8 ohm |
| HF section | 2×3"neodymium compression driver |
| with 75mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 90°(H) |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-8 will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | HF:1+1- MF:2+2- LF:3+3- |
| Rigging system | Please refer to the W-8 user |
| manual before any operation | |
| Input connectors | NEUTRIK NL8MPx2 |
| Recommend crossover | LF 45Hz-400Hz |
| MF 400Hz-1200Hz | |
| HF 1200Hz-20KHz | |
| Dimensions | 114cmX 50.6cmX 36.7cm |
| Package dimensions | 1170×475×665mm/0.37cbm |
| Enclosure | Birch Plywood |
| Net weight | 65kg |
| Gross weight | 66Kg(Carton) |
Specification |
|---|
Specification |
|---|
Specification |
|---|
Specification |
|---|
Specification |
|---|
Specification |
|---|
Specification |
|---|